11/24/2023 0 Comments Xscreensaver raspberry pi at startup![]() MatchProduct "FT5406 memory based driver" ![]() In this case, pressing the touchscreen for a longer time in one place triggers the same effect as right-clicking on that location.įor this, we have to edit a file sudo nano /etc/X11/nfĪnd insert the following content: Section "InputClass" If you use the touchscreen without a mouse and keyboard, you will definitely miss the right-click function. The following is written at the end of the file: lcd_rotate=2Īfter the restart, the image should now be rotated by 180 ° and you can turn the display over, which puts the micro USB connector on top.Īlternatively, there are the following options: display_rotate=0 # Normal It only needs to be specified for one file sudo nano /boot/config.txt Luckily, there is the possibility to rotate the picture automatically. So if you do not have a 90 degree USB cable, it will be difficult to set up the display vertically. One point that initially bothered me a bit is that the micro USB entrance for the power supply is on the bottom of the display. In addition, a Raspberry Pi Model 2B or Raspberry Pi 3 should be used, if the display is not powered externally (so only via the GPIOs).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |